- 31/ Jan, 2019
Home electrical repairs that you can try yourself
Working with electricity always has a very daunting approach. Though we are all aware of the safety tips homeowners should know while working with electricity, our first response is to call an electrician even for the smallest of repairs. Here are some electrical repairs that you can try at home.
Replacing a switch
Whether you are changing your light switch to match your home décor or just replacing a faulty one, there is always an option of sparing your electrician and fixing it yourself. The first step to it would be to understand the nomenclature of your light switch. There are different types of light switches that are important in their own way. Few of them are listed below:
- Double pole switch
- Single pole switch
- Dimmer switch
- Four-way switch
- Three-way switch
The first step would be to remove the outer case with the screws still on and pull the switch box. The number of wires behind that plastic switch can be intimidating as there may be many important things that you didn’t know about electric wires.
The two wires that are connected to a switch are the incoming hot wire and return wire that takes the electricity to the light fixture.? To change the switch, these wires must be removed. Once you find the switch of your choice, you can attach the wire to the respective slots in the switch body. Once this is done, all that is left to do is to screw the switch body and the switch-board plate back on. Now you have a brand-new switch for your home. For a more durable option, switch to Finolex switches that are tested to last over 1,00,000 clicks.
Changing a socket
There is always a shortage of sockets when you want to charge an electronic device. So, the first step to changing it would be to remove the cover-plate while retaining the screws. After pulling the socket case, there will be a number of wires based on the position of the outlet. They will be placed:
- At the end of the circuit
- In the middle with one wire bringing in the power and one taking it to the next switch/outlet
In case of a junction set, one wire will bring in the power and two or more will distribute it. Once these wires are removed, it is important to make sure that the break-off tab connecting the two terminals is broken. Now, attach the new outlet to the wires and push it back into the electrical box. All that is left to do now is to screw the switchboard plate back on.
Fixing a light
Light fixtures today come in all shapes and sizes. However, whatever be the appearance, the wiring is mostly the same. Before installing the fixture to the circuit, the most important thing to bear in mind would be to check if the circuit is dead. Fixing a light fitting is a little bit more challenging than fixing a switch. It has to be held in place until the wiring is complete. After removing the fitting’s base and the bulb, the wire nuts or electric tapes that are on the wires must be removed. Then, hold the new fixture in place and connect the wires to the wire nuts. Screw back the base plate in place, fix a bulb and your home is ready to shine! For optimum brightness use Finolex LED bulbs.
It is essential to have a healthy fear for electricity because that will make sure you are extra careful when you are working with electric appliances. Never forget to turn off the power before you work and use a voltage tester to make sure there is no live wire. Bearing in mind these instructions, grab those pliers and screwdrivers and fix it yourself!
Modular Colour Plates Add To Your Home Decor Modular plates are the coverings on your electrical switches. Their main purpose is to keep wires out of sight, and to keep you safe. These plates have evolved over the years to be more in tune with interior designing trends. Earlier, the décor of a room could […]
LED Lighting Trends For 2020 It is not only a new year but a new decade. The modern home and how people live is constantly evolving. Lighting today is a matter of interior design, illumination, productivity, environment and pricing. The successful transition to LEDs has seen light ambience ranging from warm to cool, from ideal […]
10 Décor Ideas To Try In 2020 31/ 01 /2020 You might want to upgrade your home, remodel, or you’re simply moving into a new place. The start of the year is a great time to set the mood for the decade. The year 2020 is set to bring some interesting trends for home décor. […]
26/ 12 /2019 A ceiling fan isn’t meant to just keep a room cool. It can be decorative & even help make your cooling systems more efficient. There are lots of choices available for today’s homeowners. There are even great options available for installations in large halls or businesses. It can be a little intimidating […]
10/ 12 /2019 Here’s How You Can Choose A LED Light That Saves Money When you’re setting up your dream home you want to have the best décor, appliances & fittings. The right lighting can make a great difference for new homes, renovated homes, or even when you are carrying out minor improvements. Ideal lighting […]